• Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20
  • Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20
  • Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20
  • Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20
  • Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20
  • Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20

Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20

Media: Water
Material: Brass
Connection Form: Thread
Driving Mode: Electric
Nominal Pressure: PN1.0-32.0MPa
Channel: Straight Through Type
Customization:
Gold Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
OGQ8181 Three-Wire and Two-Control AC220V
Structure
Fixed Ball Valve
Function
Mixing Valve
Temperature
Normal Temperature
Standard
Standard
Application
Industrial Usage, Water Industrial Usage
Number of Cases
50
Medium Temperature
2ºC-95ºC
Work Environment
2ºC-60ºC
Protection Level
IP54
Transport Package
Cardboard Box
Specification
50*41*29CM
Trademark
CNOG
Origin
Wenzhou, Zhejiang, China
Production Capacity
10000pieces/Year

Product Description

OGQ8181 Electric ball valve Instruction manual

Product Introduction
OGQ8181 motorized ball valves are suitable for on-off control in heating systems and fan coil systems.The product is composed of a ball valve and an actuator, and the actuator drives the valve ball to rotate 90°.The actuator is driven by a synchronous motor and has a built-in limit contact, which can make the valve power off when it is fully open or fully closed, and the action is stable.
Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20

Scope Of Application
This product is suitable for indoor heating, air conditioning system, floor heating system, solar energy emptying system and other systems.

Working Conditions
Rated voltage AC220V 50-60Hz or AC24V 50/60Hz power supply use,working environment temperature at room temperature (25°C), lower temperature is allowed to have higher relative humidity, such as 90% at + 25ºC.

Model Meaning
Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20
Product Features
  1. Synchronous motor with two angular travel switches,maintaining valve status after power outage.
  2. High energy efficiency and long service life.
  3. Low noise, operating noise less than 40dB.
  4. Plastic shaft, non-conductive, non-heat transfer.
  5. The product comes with manual auxiliary switch valve function.

Technical Parameter
Supply voltage AC220V  50-60HZ Power consumption ≤2W
Switching time ≤45s Protection level IP54
Operation mode Angle travel 90°switch, forward and reverse rotation. Control mode Three-line and two-control
Medium temperature 2ºC~95ºC(Iiquidity) Torque 4N.m
Work environment 2ºC~60ºC Closing differential pressure 0.6MPa(Two way)
0.3MPa(Three way)
Lead length 0.5m Actuator size 85x67x77mm
mm

 
Valve body specifications DN15/DN20/DN25/DN32(Two way)DN15/DN20/DN25(Three way)

Instructions for use
This product can work reliably at 85% -110% of the rated working voltage.
When installing and wiring the product, the wiring should strictly follow the diagram below. It should be confirmed that the product is installed in place, the wiring is correct, and the contact part of the wire should be checked for firmness, compression, and looseness to ensure safe use.
During the use of the product, regular general inspections should be conducted (such as every six months of operation) to test the normal switching switch product and check whether the product operates normally.
During general maintenance or repair of the product, it must be ensured that the product is not electrified; After maintenance or repair is completed, turn on the power supply to restore normal working status.


Fault analysis
Fault phenomenon User power supply Driver wire sequence Exclusion method
The closing valve becomes an open valve, and the opening valve becomes a closing valve. Zero line Double color Correct wiring
Zero line--Double color
Open valve live wire--Blue
Close valve live wire--Brown
Open valve live wire Brown
Close valve live wire Blue
After opening the valve, there is no action when closing the valve. Zero line Blue
Open valve live wire Double color
Close valve live wire Brown
After closing the valve, there is no action when opening the valve. Zero line Brown
Open valve live wire Double color
Close valve live wire Blue
After opening the valve, there is no action when closing the valve. Zero line Blue
Open valve live wire Brown
Close valve live wire Double color
After closing the valve, there is no action when opening the valve. Zero line Brown
Open valve live wire Blue
Close valve live wire Double color

Overall dimensions
Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20
Manual and Automatic Integrated Electric Ball Valve with AC220V Two-Way DN20

Model size
Product model Specifications Size
DN
(mm)
Internal thread(G) Length(L)
(mm)
Height(H)
(mm)
Width(A)
(mm)
Two way OGQ8181F-215 15 1/2" 59 126 25
OGQ8181F-220 20 3/4" 67 131 32
OGQ8181F-225 25 1" 89 139 39
OGQ8181F-232 32 1 1/4" 102 147 48
Three way OGQ8181F-315 15 1/2" 59 127 47
OGQ8181F-320 20 3/4" 68 132 50
OGQ8181F-325 25 1" 91 141 65

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Gold Member Since 2020

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company
Number of Employees
61
Year of Establishment
2007-03-15