OGQ30 Series Electric ball valve
Product Introduction
The OGQ30 series is a self checking intelligent electric ball valve.The product is suitable for on-off control in heating systems and air conditioning fan coil systems.The product consists of a ball valve and an actuator,the actuator drives the valve ball to rotate 90°movement.The actuator is internally driven by a synchronous motor with built-in limit contacts, which can power off the valve when fully open or closed, ensuring stable operation.Externally, LED lights are used to indicate whether the valve is opening or closing normally, and the traffic light switches to achieve self inspection.(When the valve is fully open, the red light goes out and the green light comes on.When the valve is fully closed, the green light goes out and the red light comes on.If the valve is not fully open or closed, the red and green lights are on at the same time.Maintenance personnel only need to look at the lights to know where the problem lies.This product is more suitable for installation and use in narrow, dark, and inconvenient maintenance areas.For example, this product can be used at the end waterway control of central air conditioning.)
Scope Of Application
This product is suitable for agricultural irrigation, ranch water supply, indoor heating, air conditioning systems, underfloor heating systems, solar evacuation systems, and other systems.
Working Conditions
Rated voltage AC220V 50-60Hz or AC24V 50/60Hz power supply use,working environment temperature at room temperature (25°C), lower temperature is allowed to have higher relative humidity, such as 90% at + 25ºC.
Model Meaning
Product Features
- Protection level IP54
- The actuator can be installed after the installation of equipment and pipelines, which is more conducive to improving installation efficiency.
- The noise of the product is low.
- The product uses a plastic rotating shaft, which is non-conductive and does not transmit electricity.
- High energy efficiency and long service life
- Eccentric design of the actuator saves more space during installation.
- Quick connection and convenient loading and unloading
- The actuator can be assembled in two directions for easier wiring and maintenance.
- When opening and closing the valve, it is equipped with a work indicator light, which automatically detects whether the valve is fully open or closed.
Technical Parameter
Model |
OGZ30 |
OGQ30 |
|
OGZ30 |
OGQ30 |
Supply voltage |
AC220V 50/60Hz or AC24V 50/60Hz 50/60HZ AC220/AC24V 50/60HZ |
Power consumption |
6W or 9W(Only when the valve is open and closed) <9W |
switching time |
≤15s |
Protection level |
IP54 |
Operation mode |
Angular travel 360 ° switch, unidirectional rotation. |
Angle travel 90 ° switch, forward and reverse rotation. |
Control mode |
Three line two control or Three wire one control |
Torque |
4Nm
7Nm |
7Nm |
Medium temperature |
2ºC~95ºC(Iiquidity) |
Closing differential pressure |
0.6MPa(Two way) |
Work environment |
2ºC~60ºC |
Actuator size |
85x63x89mm |
Lead length |
0.5m(Customizable) |
Valve body specifications |
DN15/DN20/DN25/DN32(Two way)
|
Diagram
Instructions for use
This product can work reliably at 85% -110% of the rated working voltage.
When installing and wiring the product, the wiring should strictly follow the diagram below. It should be confirmed that the product is installed in place, the wiring is correct, and the contact part of the wire should be checked for firmness, compression, and looseness to ensure safe use.
During the use of the product, regular general inspections should be conducted (such as every six months of operation) to test the normal switching switch product and check whether the product operates normally.
During general maintenance or repair of the product, it must be ensured that the product is not electrified; After maintenance or repair is completed, turn on the power supply to restore normal working status.
Wiring diagram
Fault analysis
Fault phenomenon |
Cause analysis |
Exclusion method |
Remarks column |
Continuous operation without stopping. |
The brown and blue wires are connected to the power supply, while the two color wires are not connected to power. |
Rewire according to the wiring diagram. |
Rewiring does not respond, motor damage, self responsibility for consequences. |
Does not operate after power on. |
The wires are not connected in place, resulting in poor contact. |
Check the power supply status of the power supply port and connect the wires in place. |
|
Incorrect connection to power and voltage usage. |
Connect the correct power supply and voltage. |
If the power connection is incorrect and the product is burned, the consequences will be borne by oneself. |
Overall dimensions
Model size
Product model |
Specifications |
Size |
DN (mm) |
Internal thread(G) |
Length(L) (mm) |
Height(H) (mm) |
Width(A) (mm) |
Two way |
OG30-215 |
15 |
1/2" |
50 |
121 |
23 |
OG30-220 |
20 |
3/4" |
59 |
128 |
33 |
OG30-225 |
25 |
1" |
66 |
133 |
41 |
OG30-232 |
32 |
1 1/4" |
72 |
143 |
48 |
Transportation and storage
The product should not be subjected to severe impact during transportation and unpacking, and should be transported and stored in accordance with GBT 13384-2008 "General Technical Conditions for Packaging of Mechanical and Electrical Products".
Inventory and storage should be stored on racks under the original packaging conditions, and the stacking height should not exceed 6 layers. The storage area should be clean, with an ambient temperature of 0-40 ºC, a relative humidity of not more than 85%, and no harmful substances that can cause corrosion in the air.
Quality assurance
- The product is guaranteed for 2 years from the date of sale.
- Under the correct storage, installation, and use, the company guarantees that the product will function normally during the warranty period. If damage or malfunction occurs due to poor manufacturing quality during this period, the company shall be responsible for replacement or repair.
Reminder: Please communicate with us the type of specifications you need before placing the order. If we are unable to reply to you in time due to time difference, please understand. Thank you for your choice and understanding!I wish you a happy life!Product prices change with exchange rates.