Product overview:
Electric ball valve applicable to On-off control of HVAC water system.
It consists of electric drives and body composed of two parts.
Drive (actuator) using synchronous motor drive,and action stability.
Main technical parameters:
· Power supply: 220VAC ±10%, 50-60HZ
· Power: 6W/9W
· Torque: 4N.m/7N.m
· Nominal pressure: 1.6MPa
· Closure pressure: <0.6Mpa(three-way valve)
· Travel time: 15S
· Working medium: water, fluid temperature 5-95ºC
· Motor Type: Synchronous motor
· Action time:15s
· Lead length:50cm
Attention: the actuator is putting with the valve body together,the power lead of the actuator should be 90° with the valve body.
Installation Notes:
1.Actuator must be in the level of online.
2.Do not use a strong while the drive is installed.
3.The thread that connects with valve must be Standard National Standard Pipe Thread(that is, G thread),do not use taper thread connects with valve.
4.Keep the valves and piping clear before installation,can not have debris.
5.Valves and pipelines should be installed level or vertical installation,but can not be Inverted.
6.Please sure piping and valves maintain the temperature,actuators can not be wrapped in thermal insulation layer.
Reminder: Please communicate with us the type of specifications you need before placing the order. If we are unable to reply to you in time due to time difference, please understand. Thank you for your choice and understanding!I wish you a happy life!